Product Code: 9885
Manufacturer Ref: NetLINX NXB-KNX
Manufacturer: AMX
Price: £885
OVERVIEW
The KNX Communications Gateway allows NetLinx Integrated Controllers the ability to control, integrate and communicate with homes and buildings that utilize the KNX communication protocol. This standard eliminates the problems of isolated devices/sub-systems and ensures that all components communicate via a single common language. KNX is the world's first open, royalty free, and platform independent standard for home and commercial building control.
COMMON APPLICATION
Ideal for building control, ranging from lighting and shade control to various security systems, HVAC, water control, energy management, metering as well as audio and more.
FEATURES
64 MB RAM
256 MB FLASH
Ethernet Interface to AMX control equipment
5mm Phoenix connector with screw retention to KNX network
Transmit and receive LEDs showing KNX network communication
SPECIFICATIONS
Connect to KNX through IP (Ethernet)
DIMENSIONS (HWD)
1 5/8" x 5 1/2" x 4 1/8" (4.21 cm x 14.1 cm x 10.4 cm)
RU: 1
WEIGHT
1.45 lbs (0.65 kg)
FRONT PANEL COMPONENTS
Status LED (green): Blinks once a second to indicate that the unit has powered up. Any state other than blinking once a second indicates the unit is either not powered, or has not completed boot up
KNX LED (green): Solid on indicates power is on and the unit is connected to KNX bus
Output LED (red): Lights to indicate traffic from the NXB-KNX to the KNX bus
Input LED (yellow): Lights to indicate traffic from the KNX bus to the NXB-KNX
REAR PANEL CONNECTORS
KNX 2-pin captive-wire connector
Ethernet Port - 10/100 Ethernet with PoE. LEDs show communication activity, connection status, speeds, and mode information:
SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps
L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets
POWER REQUIREMENTS
PoE powered - no local Power Supply needed
IEEE 802.3af Compliant
MEMORY
64 MB of RAM
256 MB of FLASH
OPERATING ENVIRONMENT
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Relative Humidity: 5% to 85% non-condensing
Intended for indoor use only
CERTIFICATIONS
FCC Class B
CE
IEC60950
RoHS
INCLUDED ACCESSORIES
Rubber feet
Green 2-Pin 5mm Phoenix connector with captive screws
Optional Accessories:
AC-DIN-CS3: DIN Rail Mounting Bracket FG532-01:
A DIN rail or top-hat rail is a standardized 35 mm wide metal rail with hat-shaped cross section. It is widely used, especially in Europe, for mounting industrial control equipment inside equipment racks, structured wiring cabinets or equipment closets.
To use a DIN Rail mounting bracket, mount equipment on the supplied aluminum plate or strips, and the entire assembly can then be easily clipped on or removed from the DIN rail.
Simple to Use - Simply attach the bracket to equipment, and it clips on or off the DIN rail
Space Efficient - Use where space is limited
Flexible - Mount products on the DIN rail or with existing mounting techniques
Standardized - Widely used, standardized design
PS-POE-AF: PoE Injector FG423-80:
The PS-POE-AF PoE Injector is a single-port, self-contained Power-over-Ethernet (PoE) gigabit power supply that delivers both DC power and data to PoE-equipped devices by “injecting” DC power through a Cat5 Ethernet cable.
Power-over-Ethernet eliminates the need for an AC outlet at each device installation point, resulting in easier and less expensive installation. It also can be used to extend the distance between the PoE devices and standard power outlets by up to 328 feet (100 meters).
APPLICATION: DC power and data for PoE-equipped devices
DC POWER OUTPUT
Provides up to 15 watts of power, delivered over 328 feet (100 meters) of Cat5 cable
Short circuit, overload protected
AC POWER INPUT
Voltage Range - 100-240 VAC
US power cord included (110 VAC installations only)
ENCLOSURE: Molded black matte plastic with built-in dual RJ-45 jacks
DIMENSIONS (HWD): 5 1/4" x 2 1/8" x 1 7/16" (133 mm x 54 mm x 36 mm)
WEIGHT: 7 oz (400 g)
